Table of Contents
Advertisement
6. Advanced
VIDEO PAL
50f/s
167
160
125
120
83
80
42
40
0
2/2
Image 6-35
film to video conversion: 2/2 and 2/3 pull down method
Image 6-36
The filmmode detection insures that these converted signals are shown without artefacts, especially motion artefacts due to bad
de-interlacing.
This function may cause undesired effects on standard sources, therefore it can be disabled (OFF) at any time
Enabling/disabling the filmmode detection
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select Filmmode detection
5. Press → to pull down the menu
6. Use ↓ or ↑ to enable or disable the Filmmode detection (image 6-37)
7. Press ENTER
56
NTSC VIDEO
FILM
60 f/s
24 f/s
167
133
83
1/30s
50
1/20s
0
3/2
R5976837 BARCO ID R600/R600+ 21/09/2006
Advertisement
Table of Contents
