C.1 Cleaning The Lens; Maintenance; Cleaning The Lens; Cleaning The Dustfilters - Barco iD R600 Owner's Manual

C. MAINTENANCE
Overview
•

Cleaning the lens

•

Cleaning the dustfilters

C.1 Cleaning the lens

To minimize the possibility of damage to optical coatings, or scratches to lens surfaces, we have developed
recommendations for clean. FIRST, we recommend you try to remove any material from the lens by blowing
it off with clean, dry deionized air. DO NOT use any liquid to clean the lenses.
Necessary tools
Toraysee TM cloth (delivered together with the lens kit). Order number : R379058.
How to clean the lens ?
Proceed as follow :
1. Always wipe lenses with a CLEAN Toraysee
2. Always wipe lenses in a single direction.
Warning: Do not wipe back and forwards across the lens surface as this tends to grind dirt into the coating.
3. Do not leave cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.
4. If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty cloth.
C
AUTION
cloth.
Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.
Other lenses can also be cleaned safely with this Toraysee

C.2 Cleaning the dustfilters

Overview
•

Dustfilters

• Cleaning
C.2.1 Dustfilters
Location of the filters
There are 4 filters located at different positions
1. Filter1: Lamp 1
2. Filter2 : Lamp 2
3. Filter 3 : X-Cube filter
4. Filter 4 : Input filter
R5976837 BARCO ID R600/R600+ 21/09/2006
TM cloth.
:
Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the
TM cloth.
C. Maintenance
121