Jaw Capacity Chart; Installing Jaws To Chuck; Mounting The Adapter - Axminster CSC500C User Manual

Jaw Capacity Chart...

Installing Jaws to Chuck...

Select the appropriate jaw for your project. Place the selected jaw on top of the carrier,
matching the number stamped on the main body to the number on each individual jaw. Using
the provided hex wrench, firmly tighten the jaw down onto the surface of the carrier with the
hex screws. Repeat this step for the remaining three jaws.

Mounting the Adapter...

1. Wipe the inside of the threads and the outside of the adapter to insure both surfaces are
clean.
2. Use the furnished 3/4"xl6tpi adapter if necessary.
3. Hold the chuck in your hand, screw and tighten the adapter into the bottom threaded
portion of the chuck.
05
www.axminster.co.uk
Chuck
Adapter