Hold Function; Mute Key; Ringer/Alerter Tones; Volume Control - Aastra CM-16 User Manual

CM16.book Page 12 Friday, June 18, 2004 3:22 PM
• Once the selected number appears on the display, press the
softkey — the display shows
Press the softkey. If there is no name associated with the
•
number, the display will prompt, to enter a name to save the entry.
Use the instructions in the section
to save the entry in the Directory. If there is a name associated
with the number it will automatically save it to the directory and briefly
indicate
To delete an entry in the Redial list:
key, and use the E E E E and the L L L L keys to scroll up and down through
r r r r
Press
•
the list of the last ten numbers dialed
Once the selected number appears on the display, press the
•
and the L L L L key once — the display shows
Press the softkey. The display will show
•
.
Press the softkey to erase the entry. Display shows
•
You can return to the main display any time by pressing the

HOLD FUNCTION

To place a call on hold, press the
O O O O
key again.

MUTE KEY

Use the mute key when you want to be able to hear a caller but have
them not hear you. Press the X X X X key to mute the handset. Press the X X X X key again
to disengage mute.
ALERTER TONES
The CM-16 uses tones to provide information as follows:
Low Battery one tone every three minutes
Out of Range whenever handset loses connection to base station
Check Whenever you try to establish a link with the base
Line Cord station and the DC power is not plugged in and/or
the line cord is not plugged into the base.

VOLUME CONTROL

The volume key, located on the side of the handset, controls both the receiver
and ringer volume.
4
.
O O O O
key. To take a call off hold, press the
s
softkey
s
.
I I I I
key.
Model CM-16 User Guide 12