About; Resetting To The Factory Default Settings - Axis Q7401 User Manual

To do this, enter the name and path to the file to upload in the field provided. The file might be on e.g. your workstation. As an
alternative to entering the path directly, click the Browse button and then select the correct file.
Now select the user level for the uploaded file. Setting the user access level means that you have complete control over which
files can be viewed by which users. When the file is shown correctly in the text field, click the Upload button.
All uploaded files are shown in the list in the lower section of the page. To remove a file, check the box provided next to it and
then click the Remove button.
Plain Config - this function is for the advanced user with experience of Axis video encoder configuration. All parameters can
be set and modified from this page. Help is available from the standard help pages.

About

Here you can find basic information about your video encoder. You can also view third party software licenses.

Resetting to the Factory Default Settings

To reset the video encoder to the original factory default settings, go to the System Options > Maintenance web page (as
described in Maintenance, on page 43) or use the Control button on the side of the video encoder (see Overview, on page 5)
as described below:
Using the Control Button
To reset the video encoder to the factory default settings using the Control Button:
1. Disconnect the power adapter.
2. Press and hold the Control button while reconnecting the power.
3. Keep the Control button pressed until the Status Indicator color changes to amber (this may take up to 15
seconds).
4. Release the Control button.
5. When the Status Indicator changes to green (which may take up to 1 minute), the process is complete and the
video encoder has been reset. The unit now has the default IP address 192.168.0.90
Note:
For other methods of setting the IP address, please refer to the product's Installation Guide that accompanies the
product, or download a copy from www.axis.com
AXIS Q7401 - System Options
45