Advanced; Scripting; File Upload; About - Axis M7001 User Manual

Advanced

Scripting

Scripting is an advanced function that enables you to customize and use scripts. This function is a very powerful tool.
Caution!
Improper use may cause unexpected behavior or even cause loss of contact with the unit. If a script does cause problems,
reset the unit to its factory default settings.
Axis strongly recommends that you do not use this function unless you understand the consequences. Note that Axis
support does not provide assistance for problems with customized scripts.
For more information, please visit the Developer pages at www.axis.com

File Upload

Files (e.g. web pages and images) can be uploaded to the AXIS M7001 and used as custom settings. Uploaded files are
accessed through http://<ip address>/local/<user>/<file name> where <user> is the selected user access group (viewer,
operator or administrator) for the uploaded file.

Plain Config

Plain Config is for the advanced user with experience of Axis video encoder configuration. All parameters can be set and
modified from this page. Help is available from the standard help pages.

About

Here you can find basic information about your video encoder. You can also view third party software licenses.

Resetting to the Factory Default Settings

To reset the video encoder to the original factory default settings, go to the System Options > Maintenance web page (as
described in Maintenance, on page 33) or use the Control button on the video encoder (see Overview, on page 5) as described
below:
Using the Control Button
To reset the video encoder to the factory default settings using the Control button:
1. Disconnect the network cable.
2. Press and hold the Control button while reconnecting the network cable.
3. Keep the Control button pressed until the Status Indicator color changes to amber (this may take up to 15
seconds).
4. Release the Control button.
5. When the Status Indicator changes to green (which may take up to 1 minute), the process is complete and the
video encoder has been reset. The unit now has the default IP address 192.168.0.90
Note:
For other methods of setting the IP address, please refer to the Installation Guide supplied with the product.
AXIS M7001 - System Options
34