Ptz (Pan Tilt Zoom); Installing The Ptz Driver - Axis Q7401 User Manual

PTZ (Pan Tilt Zoom)

This Axis product supports several PTZ devices. Please see www.axis.com for a complete list of supported devices, and to
obtain the correct driver. Follow the instructions below to install a PTZ device.
Installing a PTZ device is accomplished in two steps:

• Installing the PTZ driver

• Setting up the COM Port, see page 43
Installing the PTZ driver
1. Go to PTZ > Driver Selection.
2. Under Upload, click Browse... to find the driver. The driver has the file extension.ptz (e.g. driver.ptz).
3. Click Upload. If the driver was successfully uploaded, it will be available under Driver Management > Uploaded
drivers.
4. From the Uploaded drivers drop-down list, select the driver to install and click Save.
5. Enter the Device ID, select the Device Type from the drop down list and click Save.
6. Set up the COM Port for PTZ driver. See COM Port, on page 43 for instructions.
AXIS Q7401 - PTZ (Pan Tilt Zoom)
21