Guard Tour; Advanced - Axis Q7401 User Manual

Guard tour

A guard tour moves between chosen Preset Positions, one-by-one, in a pre-determined order or at random, and for
configurable time periods. The guard tour sequence will keep running, after the user has logged off or closed the browser.

Advanced

Device Settings - The device settings window is for driver specific settings, so the appearance of this window can vary
depending on the driver installed. Options that can be configured include: Driver Specific Settings for Video Source 1,
Mechanical Limits for Moving Video Source 1, Light Control for Video Source 1, and Extended Driver Specific Settings for
Video Source 1.
Note:
For download and installation information about PTZ drivers for your Axis product please visit www.axis.com/techsup/
Ctrl Panel - The Panel View Settings window contains tools for creating and saving short command buttons that are located
under the Control panel. These buttons provide direct access to various built-in auxiliary commands provided by the PTZ
driver and are displayed in the PTZ Panel.
Limits - Define the pan, tilt, zoom and focus limits for the video encoder. Movements to the left and right, up and down can
be restricted to narrow the area under surveillance. The near focus limit can be set to avoid focusing on objects too close to
the camera.
Note:
To be able to set limits, the driver needs to be an "absolute" driver.
AXIS Q7401 - PTZ (Pan Tilt Zoom)
23