Advanced; About; Resetting To The Factory Default Settings - Axis Q7406 User Manual

From the drop-down lists, select the size and level of information to be added to the System and Access Log files.
The default information level for the Access Log is set to Critical & Warnings. However, in an error situation and when
requesting support, set it to the lowest information level Critical & Warnings & Info.
For the Log Level for Email, select from the drop-down list the level of information to send as email and enter the destination
email address.

Advanced

Scripting is an advanced function that enables you to customize and use scripts. This function is a very powerful tool.
Caution!
Improper use may cause unexpected behavior or even cause loss of contact with the unit. If a script does cause problems,
reset the unit to its factory default settings. A backup file may be of use to return the unit to its latest configuration.
Axis strongly recommends that you do not use this function unless you understand the consequences. Note that Axis
support does not provide assistance for problems with customized scripts.
For more information, please visit the Developer pages at www.axis.com/developer
File Upload - To use your own files (web pages and images) as custom settings, they must first be uploaded to the AXIS Q7406
video encoder. To do this, enter the name and path to the file in the field provided; or click the Browse button and select the
file. Select the user level for the uploaded file. This helps you define user access to files. When the file is displayed correctly in
the text field, click the Upload button. All uploaded files are shown in the list in the lower section of the page. To remove a
file, check the box provided next to it and then click the Remove button.
Plain Config - this function is for the advanced user with experience of Axis video encoder configuration. All parameters can
be set and modified from this page. Help is available from the standard help pages.

About

Here you can find basic information about your video encoder. You can also view third party software licenses.

Resetting to the Factory Default Settings

This will reset all the parameters, in all 6 units (including all six IP addresses), to the
factory default settings.
1. Press both the Reset button and Control button.
2. Release the Reset button and hold the Control button.
3. Keep the Control button pressed until the Power indicator turns green and the six
Status indicators turn amber (this may take up to 15 seconds).
4. Release the Control button. When the Status indicators display green (which can take
up to 1 minute) the process is complete and the video encoder has been reset.
5. Re-assign the IP addresses, using one of the methods described in this document.
To reset an individual unit to the original factory default settings, use the button
provided in that unit's web interface. For more information, please see the online
help .
Note: For other methods of setting the IP address, please refer to the product's Installa-
tion Guide that accompanies the product, or download a copy from
www.axis.com
AXIS Q7406 - Resetting to the Factory Default Settings
37
Power Indicator
POWER
Status Indicator
6
5
Reset button
4
3
Control button
2
1