Axis Q7401 User Manual page 24

OSD Menu - If the PTZ unit supports an internal configuration menu, this can be accessed using the On-Screen Display (OSD).
Configure the analog camera by opening and navigating through its internal menu in this display.
PTZ control queue
Use the PTZ control queue window to enable and disable PTZ queueing. This window allows you to set up a queue for viewers
wanting to access the video encoder, and limits the number of viewers and the length of time each viewer can access and
control the PTZ unit. For more information on how to set up the control queue, please see the online help
Note also that a viewer who belongs to a group (see Security, on page 35) with a higher PTZ priority can go before other users
in the queue and take control of the video encoder.
The order of priority for taking control of the queue is as follows:
1. Administrators - An administrator takes over PTZ control regardless of who is first in queue. The administrator
will be removed from the queue 60 seconds after their last PTZ control command.
2. Event - The AXIS Q7401 can be set up to take control of the queue and move to a specific position for 20 seconds
when triggered by an alarm. The event will immediately be placed first in the queue, except when an
administrator is in control. For more information, see Triggered Event, on page 29.
3. Operator - Same as administrator, but with lower priority.
4. Guard Tour - A guard tour has PTZ control for an indefinite period of time. It may be overridden by an Operator,
Event or administrator. Guard Tour will resume when higher priority groups leave the queue. For more information
see Guard tour, on page 23.
5. Viewer - Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ control before control is passed
to the next viewer in queue.
Note:
To identify the different users in the viewer group, cookies must be enabled on the client.
AXIS Q7401 - PTZ (Pan Tilt Zoom)
24
.