Preset Positions - Axis Q7401 User Manual

Notes:
After a PTZ driver has been installed, PTZ > Advanced > Device will contain additional driver specific settings that
•
can be configured for the PTZ device.
• Advanced users and application developers can also use the Axis Application Programming Interface and HTTP
specification for generic control of PTZ devices using CGI commands or a TCP/IP client. Refer to the Axis website
at www.axis.com for further information.
Uninstalling a PTZ driver
1. Go to PTZ > Driver Selection
2. Click Uninstall
For more information see the online help

Preset positions

A preset position is a pre-defined camera view than can be used to quickly move the camera to a specific location.
From Preset Position Setup, use the Pan, Tilt and Zoom (PTZ) controls to steer the camera to the required position. When
satisfied with the camera's position, enter a descriptive name. The camera position, iris and focus settings are then saved as a
preset position.
The position can be assumed at any time, by selecting the preset's name from the Preset positions drop-down list. Preset
positions can be selected in the Live View page; they can be selected as an action when an event is triggered as a part of a
Guard Tour.
One position can be set as the Home position, which is readily accessible by clicking the box beside Use current position as
Home. The position's name will then have (H) added to the end, for example, Office Entrance (H).
.
22
AXIS Q7401 - PTZ (Pan Tilt Zoom)