Control Queue - Axis 215 PTZ User Manual

AXIS 215 PTZ/AXIS 215 PTZ-E - Setup
Auto-flip - the AXIS 215 PTZ/AXIS 215 PTZ-E will simulate continuous pan movement in the same direction,
i.e. the camera will pan the full 360 degrees, even though there is a mechanical stop at ±170 degrees.
This is achieved by reversing the camera lens and flipping it over when the camera reaches the mechanical stop.
There will be a slight delay during the lens reversal.
Enable movement prediction - the camera will attempt to predict the new position in the pan movement, after
compensating for the slight delay while the camera changes direction after an Auto-flip. This is useful for
tracking moving objects or persons when using the joystick or emulated joystick mode.
See the online help for more information.
Controls
In this page you can add a shortcut command button to the control panel. This requires you to provide the URL
(path) to an auxiliary command provided by the PTZ driver, or to some other command accessed via the
VAPIX® API. See the online help for more information.
Calibration
The Area zoom functionality on the Live View page makes it possible to zoom in on an area marked by drawing
a square directly in the image. In order to fine-tune the precision of the square, Area zoom should first be
calibrated from this page.
Follow the on-screen instructions to calibrate the precision of the zoom.

Control Queue

PTZ Control Queue - the administrator can set up a queue for the PTZ controls. Once set up, the PTZ Control
Queue buttons will appear on the Live View page offering one viewer exclusive control for a limited amount of
time. Other users will be placed in the queue.
PTZ Control Queue on Live View page
Please see the online help for more information.
24