Axis 215 PTZ User Manual page 6

The control panel
Click the Ctrl panel button to display the control panel, where the following settings
are available:
• Auto focus - automatically adjusts the image focus.
• Backlight comp - enabling backlight compensation makes the subject clearer
if the image background is too bright, or if the subject is too dark.
• IR cut filter - when set to off, the camera will be able to "see" infrared light at
night, thus making the image clearer. The image is shown in black & white
when the IR cut filter is off.
• Brightness - the image brightness can be adjusted using the +/- buttons,
where a higher value produces a brighter image. Click the Reset button to
revert to the values saved under Video & Image > Advanced > Camera.
• Shortcuts - these buttons can be configured to provide direct access to vari-
ous built-in auxiliary commands provided by the PTZ driver.
Viewer controls
The default viewer to use for displaying moving images is selected from Setup > Live View Config > Layout.
The AMC viewer toolbar is available in Microsoft Internet Explorer for Windows only. See How to stream
MPEG-4, on page 9 for more information. The AMC viewer toolbar displays the following buttons:
The Play/Stop buttons start and stop the live video stream.
The Snapshot button takes a snapshot of the currently displayed image. The Snapshot function and the
target directory for saving snapshots can be configured from AMC (AXIS Media Control), which is
available from the Windows Control Panel (Internet Explorer for Windows only).
Click the Start recording button to make an MPEG-4 recording. Click again to stop the recording. The
recording is saved in the folder specified in the Recording tab in the AMC Control Applet. Only available
if the recording button is enabled on the Live View Config page
Click the View Full Screen button and the video image will fill the entire screen area. Press Esc (Escape)
on the computer keyboard to cancel full screen view.
Click the Mute /Microphone buttons to switch the sound off and on. Only available if Audio is
enabled. (AXIS 215 PTZ-E does not support audio.)
Use the sliders to control the volume on the speaker and microphone. The volume can be set
between 0 and 100. (AXIS 215 PTZ-E does not support audio.)
Navigation mode:
Center will move the camera view to center on the position that was clicked. Also used for Area zoom.
Joystick moves the camera in the direction indicated by a mouse click, relative to the center of the
image. The further from the center the image is clicked, the higher the movement speed.
AXIS 215 PTZ/AXIS 215 PTZ-E - Accessing the camera
6