Avocent Cyclades ACS Command Reference Manual page 64

50 ACS Advanced Console Server Command Reference Guide
To list all configured hosts in the Kerberos server, run the following command, which displays
all hosts added through the ktadd command in the Kerberos server.
# klist -k
7. Configure hostname and domain name.
# hostname acs48-2
# domainname cyclades.com
To access the ACS console server through rlogin and Telnet:
In addition to performing the steps described in To configure the ACS console server for SSH: on
page 49, make the following configuration changes.
1. Configure the /etc/inetd.conf file by uncommenting the folloing line lines.
#KERBEROS SERVICES
klogin stream tcp nowait root /usr/sbin/tcpd /usr/local/sbin/klogind
-ki
telnet stream tcp nowait root /usr/sbin/tcpd /usr/local/sbin/telnetd
2. Restart the inetd service.
# daemon.sh restart NET
3. Save the configuration.
# saveconf
To test the configuration:
1. The client must have a kerberized SSH. In addition, configure the following parameters in the
etc/ssh/ssh_config file.
GSSAPIAuthentication yes
GSSAPICleanupCreds yes
2. The client must have the same krb5.conf file in the Kerberos server.
# scp root@kerberos-server.cyclades.com:/etc/krb5.conf /etc/krb5.conf
3. Request the ticket from the Kerberos server.
# kinit -f -p john
Password for john@CYCLADES.COM: ******
You are prompted to insert the principal password, which is in the Kerberos server database.
4. Check to see if the ticket received successfully.
# klist