Gsm Pcmcia Cards; Table 2.8: Gsm Pcmcia Configuration Parameters - Avocent Cyclades ACS Command Reference Manual

16 ACS Advanced Console Server Command Reference Guide

GSM PCMCIA cards

In order to configure a GSM PCMCIA card, enter the following command. Refer to Table 2.8 for
parameter descriptions.
cli> config network pcmcia <slot number[1-2]> gsm localip <n.n.n.n>
remoteip <n.n.n.n> enablecallback [yes|no] callbacknum <string> pin
<string> otpauthreq [yes|no]

Table 2.8: GSM PCMCIA Configuration Parameters

Parameter
enablecallback
callbacknum
localip
remoteip
pin
otpauthreq
To configure a GSM PCMCIA card (example):
1. Enable and configure the GSM PCMCIA card.
cli> config network pcmcia 2 gsm localip 10.0.0.1 remoteip 10.0.0.2
pin 1234
2. Enable callback and add the call back number, if desired.
cli> config network pcmcia 2 modem
gsm> enablecallback yes
gsm> callbacknum 4155552515 localip 10.0.0.1 remoteip 10.0.0.2
3. Enable One Time Password authentication, if required.
4. Activate and save your configuration.
Value Description
yes|no Enable or disable GSM call back feature.
<string> Add a call back number when callback is enabled.
<n.n.n.n> Assign a local IP address for PPP communication.
<n.n.n.n> Assign a remote IP address for PPP communication.
<string> Enter the assigned PIN.
yes|no Enable or disable One Time Password (OTP) authentication.