Cli Navigation; Saving Cli Changes; Table 1.2: Cli Commands For Saving Configuration Changes - Avocent Cyclades ACS Command Reference Manual

4 ACS Advanced Console Server Command Reference Guide

CLI Navigation

Autocompletion
Autocompletion may be used to find out what commands and parameters are available.
• Pressing the
cli> <Tab> <Tab>
administration
applications
config
• Pressing the
parameter name. If there is more than one parameter name beginning with the typed characters,
then pressing the
cli> i<Tab>
info
cli> a<Tab> <Tab>
administration applications
• Pressing the
the hierarchy. For example:
cli> config <Tab>
administration
applications
discardchanges

Saving CLI changes

Configuration changes made in any of the CLI modes are temporarily. Changes are not activated
and saved into the configuration files unless you run the commands described in the
following table.

Table 1.2: CLI Commands for Saving Configuration Changes

Command
config runconfig
config savetoflash
config discardchanges
key twice displays all the commands at the top level. For example:
Tab
info
portStatus
quit
key once after partially-typing a command automatically completes the
Tab
key again displays them all. For example:
Tab
key after the first level command displays the commands one level down in
Tab
ipmi
network
physicalports
Action
Saves and activates configuration changes in the appropriate configuration files.
Saves any unsaved configuration changes in the configuration files and creates a
zipped backup copy of the files in a backup directory for possible later retrieval.
Restores the backed up configuration files, overwriting any configuration changes
made since the last time the savetoflash option was executed.
return version
shell
show
restorefromflash
runconfig
savetoflash
security