Avocent Cyclades ACS Command Reference Manual page 114

100 ACS Advanced Console Server Command Reference Guide
2. Choose Add Menu Option and complete the requested fields. The following question defines
the action that must be taken.
Enter the command for the new menu option:
3. Select option 5 to save the configuration changes to Flash.
NOTE: Action may be telnet host_ip or ssh -l username host_ip where host_ip is the IP address of the
target server.
To assign ports to the menu shell:
1. If no authentication is required to gain access to the menu, configure the following parameters
in /etc/portslave/pslave.conf for the ports that use this menu shell.
s<x>.protocol telnet
conf.telnet /bin/menush
s<x>.authtype none
Where <x> is the port number being configured.
2. If authentication is required to gain access to the menu, the user's default shell must be
modified to run the /bin/menush. In /etc/passwd the shell should be changed as per the
following example.
user:FrE6QU:505:505:Embedix User,,,:/home/user:/bin/menush
3. In pslave.conf, the port where the serial terminal is attached must be configured for login with
local authentication.
s<x>.protocol login
s<x>.authtype local
Where <x> is the port number being configured.
4. Activate and save the configuration changes.
# runconf
# saveconf