Table 4.7: Console Escape Commands - Avocent Cyclades ACS Command Reference Manual

70 ACS Advanced Console Server Command Reference Guide
To close the session from ts_menu (local):
1. Enter the escape character shown when you connect to the port. In character/text mode, the
Escape character is
2. Console escape commands are displayed.

Table 4.7: Console Escape Commands

Command
l
c
z
b
t
e
3. Press -e to exit from the session and return to the original menu.
4. Select the exit option to return to the shell prompt.
To close the session from ts_menu (Telnet/SSH):
Unless a different escape character is used for closing your Telnet/SSH session, you may close your
entire Telnet session. To specify a different character, connect to your unit and use the -e option.
For example, to set
# telnet -e ^? 192.168.160.10
# ssh -e ^? user1@192.168.160.10
To exit from an entire Telnet session, type the escape character. For a SSH session, type the escape
character plus dot (.).
NOTE: To close an SSH session the escape character followed by a dot (.) must be entered at the beginning of
a line.
To call ts_menu from CLI:
1. Execute the following command from the CLI prompt. Refer to Table 4.8 for
configuration parameters.
cli> applications connect [parameter] <value>
2. Activate and save your configuration.
.
Ctrl+]
Description
go to line mode
go to character mode
suspend telnet
send break
toggle binary
exit telnet
as the escape character, type:
Ctrl+?