Table 7.10: IPMI CLI Configuration Parameters
Parameter
add
edit
delete
authtype
password
privilege
serverip
username
key
server
3.
Activate and save your configuration.
Value
<alias>
<alias>
<alias>
md2
md5
none
password
<password>
admin
operator
user
<n.n.n.n>
<name>
<^(character)>
<alias>
Description
Add and configure an IPMI device.
Edit the parameters of an IPMI enabled device.
Remove an IPMI device.
Add an authentication method.
Assign a password to access the device.
Assign a user access level.
IP address of the device.
Username to access the device.
The hotkey used to access the IPMI.
NOTE: The default IPMI hotkey is ^I, where ^
stands for the Ctrl key on the keyboard. The
hexadecimal code for the Ctrl+I default IPMI
hotkey is the same as the keyboard's Tab key.
You may choose to change the default using
this parameter.
The name of the IPMI device.
Appendices
133