Chapter 2: Installation
Getting Started
Before installing your OutLook system, refer to the lists below to ensure that
you have all the items that shipped with the OutLook as well as all other items
necessary for proper installation.
Supplied with the OutLook
Your OutLook switch package contains the following items:
•
OutLook 180DX unit
•
Local country power cord
•
OutLook 180DX Installer/User Guide
•
OutLook 180DX Quick Installation Guide
•
Download Instructions
Optional items
•
19 inch Switch Mounting Bracket Kit (available from Avocent)
•
Serial cable, DB9 female, to update firmware
•
Adaptors (available from Avocent)
•
To connect a PC computer that has a serial mouse—ELC-11KM
•
To connect a Macintosh computer with an ADB keyboard—ELC-12KM
•
To connect a Sun workstation—ELC-11ST
•
To connect a serial device—ELC-15TE
•
To connect a Sync-on-green video card (option for HP9000/RS6000
computers)—ELC-11RVA, ELC-11RVB
Rack Mounting your OutLook 180DX Unit
You can either place your switch on your desktop or rack mount your unit into
an EIA standard rack.
Obtain a 19 inch Switch Mounting Bracket Kit (1U) to rack mount your
OutLook. Before installing the switch and other components in the rack,
stabilize the rack in a permanent location. Start rack mounting your
equipment at the bottom of the rack, then work to the top. Avoid uneven
loading or overloading of racks.
CAUTION: Rack Loading - Overloading or uneven loading of racks may result in shelf or rack
failure, causing damage to equipment and possible personal injury. Stabilize racks in a
permanent location before loading begins. Mount components beginning at the bottom of the
rack, then work to the top. Do not exceed your rack load rating.
Chapter 2: Installation
9