Avocent Outlook 180DX Installer/User Manual page 32

26
OutLook 180DX Installer/User Guide
Flag Appearance Settings
Setting Values
Enabled Flag Off
Ports On
Names On
Ports Timed
Names Timed
Row Ø-14
Column Ø-25
Color Ø-7
Text Ø-7
To access the Flag Configuration screen:
1. Press Print Screen then F2 to access the Advanced Menus screen.
2. Highlight Setup - Flag and press Enter. The Flag Configuration screen appears.
Figure 3.6: Flag Configuration Screen
To change the status flag display:
1. Highlight Setup - Flag in the Advanced Menus screen and press Enter. The
Flag Configuration screen appears.
2. Highlight the settings you want to change and use the Plus ( + ) or Minus
( – ) keys to adjust the values. The Flag Appearance Settings table
describes each of the available menu attributes.
3. Press Enter to save the settings and exit the menu.
Setting User Console Security
Use the Security Configuration screen to secure your user station. You can
establish a screen saver mode that engages after your station remains inactive
for a user-specified time. Once engaged, your station will remain locked until
you press any key or move the mouse. You will then need to type in your
password to log back in to the system.
Effect
Flag does not appear.
Flag displays computer by port number.
Flag displays computer by name.
Port number appears for five seconds after switching.
Name appears for five seconds after switching.
Position the flag vertically on the screen.
Position the flag horizontally on the screen.
Set the flag color.
Set the flag text color.