2
P
RODUCT DESCRIPTION
2.2 O
PTIONS
Pneumatic dispensing edge
– The dispensing edge is pivoted in the dispensing
head. Compressed air presses the dispensing edge
onto the surface of the product.
– Allows compensation for height differences
between the products or on the product surface.
V-shape dispensing edge
– An alternative for applications which do not leave
enough space for the standard dispensing edge hol-
der, which juts out to the bottom side.
– Is attached directly to the machine
Adjustable dispensing edge holder
Enables a vertical fine adjustment of the dispensing
edge towards the product without moving the machine.
[16] Pneumatic dispensing edge
[17] V-shape dispensing edge
[18] Adjustable dispensing edge holder (pictured red resp. dark
gray)
21
ALS
104
GB