Table of Contents
Advertisement
Example:
P330-N(super)# show radius authentication
RADIUS authentication parameters:
---------------------------------
Mode:
Primary-server:
Secondary-server:
Retry-number:
Retry-time:
UDP-port:
Shared-secret:
set radius authentication
Use the set radius authentication command to enable or disable
authentication for the P330 unit. RADIUS authentication is disabled by default.
The syntax for this command is:
set radius authentication [enable|disable]
tech
Use the tech command to enter tech mode. This command is reserved for service
personnel use only.
Avaya P334T User's Guide
Enabled
192.168.42.252
192.168.48.134
4
5
1645
sodot
Chapter 6
CLI – Layer 2
137
Advertisement
Table of Contents
