Table of Contents
Advertisement
Chapter 3
Avaya P334T Front and Back Panels
Avaya P334T Front Panel
The Avaya P334T front panel contains LEDs, controls, connectors and an expansion
Module slot, as well as a console connector. The status LEDs and control buttons
provide at-a-glance information.
The front panel LEDs consist of Port LEDs and Function LEDs. The Port LEDs
display information for each port according to the illuminated function LED. The
function is selected by pressing the left or right button until the desired parameter
LED is illuminated. Each Function is displayed first for ports 1-24, and then, by
pressing the button again displays the function for ports 25-48 (see Figure 3.2).
Pressing the same button again will move to the next function. When the 25-48 LED
is OFF, ports 1-24 are displayed, and when the 25-48 LED is ON, ports 25-48 are
displayed.
For example, if the COL LED is illuminated, and the 25-48 LED is off, then all Port
LEDs show the collision status of ports 1-24. If you wish to select the LAG function
for the same ports, then press the right button until the LAG Function LED is lit and
the 25-48 LED is OFF. If you then wish to select Rx for ports 25-48, press the left
button several times until both the Rx function LED and the 25-48 LED light.
Figure 3.1 shows the Avaya P334T front panel. Figure 2.2 shows the order of the
function parameters selected using the front panel buttons. Figure 3.3 shows a
detailed view of the LEDs (described in Table 3.1), pushbuttons, the Expansion
Module slot, and the RJ-45 console connector at the bottom right.
Figure 3.1
Avaya P334T User's Guide
Avaya P334T Front Panel
8
Advertisement
Table of Contents
