Operating Frequencies; Receivers - Audio Technica ARTIST ELITE 4000 Installation And Operation Manual

Professional uhf wireless systems
Table of Contents

Advertisement

5000 Series System Configurations
System
Dual Body-pack System
AEW-5111
Dual Handheld Systems
AEW-5233
AEW-5244
AEW-5255
AEW-5266
Dual Systems with Body-pack and Handheld Transmitters
AEW-5313
AEW-5314
AEW-5315
AEW-5316
Dual Systems with Pairs of Body-pack and Handheld Transmitters
AEW-5413
AEW-5414
AEW-5415
AEW-5416
Note: All model numbers have an additional letter at the end to indicate frequency band.

Operating Frequencies

4000/5000 Series systems and components operate on 200
frequencies in one of two 25 MHz-wide UHF frequency ranges:
• Band C 541.500–566.375 MHz (TV Channels 25–30)
• Band D 655.500–680.375 MHz (TV Channels 44–49)
For simplicity, model numbers used throughout this manual will
reference only the basic model number without the "C" or "D"
band indications.
Artist Elite Series components feature an advanced digital Tone
Lock
squelch system and unique Dual Compander design
(patents pending). As a result, Artist Elite Series transmitters
and receivers must be used together in Tx-Rx pairs and should
not be mixed with components from other Audio-Technica
wireless systems, or with those of other manufacturers.
All Artist Elite Series components feature soft-touch controls
for quick, easy access to a formidable range of functions; an
LCD information display in each unit provides convenient visual
indication of unit settings and operation. Digital data sent by the
transmitters is available for display on the receivers.

Receivers

Both Artist Elite receiver models feature True Diversity
reception. Two antennas feed two completely independent
RF sections on the same frequency; automatic logic circuitry
continuously compares and selects the superior received signal,
providing better sound quality and reducing the possibility of
interference and dropouts.
Receiver
AEW-R5200
AEW-R5200
AEW-R5200
AEW-R5200
AEW-R5200
AEW-R5200
AEW-R5200
AEW-R5200
AEW-R5200
AEW-R5200
AEW-R5200
AEW-R5200
AEW-R5200
Transmitter
UniPak™
Body-pack
Condenser
AEW-T1000 (2)
AEW-T3300 (2)
AEW-T5400 (2)
AEW-T1000
AEW-T3300
AEW-T1000
AEW-T1000
AEW-T5400
AEW-T1000
AEW-T1000 (2)
AEW-T3300 (2)
AEW-T1000 (2)
AEW-T1000 (2)
AEW-T5400 (2)
AEW-T1000 (2)
Both receivers offer a choice of 200 operating frequencies in a
25 MHz-wide UHF frequency range. AEW wireless are designed
with a channel spacing that exceeds the transmitters' maximum
modulation deviation, so even adjacent channels are actually
usable, unlike some other wireless systems on the market.
(For operation of two or more systems at the same time,
use the IntelliScan function for frequency selection or, if setting
the frequencies manually, use frequencies that are within the
same IntelliScan groups listed on page 30.)
AEW-R4100: A single synthesized UHF receiver in a half-rack
1U case. Its power supply operates on 100–240V 50/60 Hz AC
power worldwide with the appropriate IEC-type power input
cordset.
AEW-R5200: Two independent synthesized UHF receiver
channels in a full-rack 1U case. Its common power supply
operates on 100–240V 50/60 Hz AC power worldwide with
the appropriate IEC-type power input cordset. In addition, a
"pass-through" AC outlet on each receiver with included AC
jumper cable permits daisy-chaining of an entire AEW-R5200
receiver stack, freeing AC outlets for other equipment.
Handheld
Dynamic
AEW-T4100 (2)
AEW-T6100 (2)
AEW-T4100
AEW-T6100
AEW-T4100 (2)
AEW-T6100 (2)
7

Advertisement

Table of Contents
loading

Table of Contents