Setting Atw-R5220/Atw-R5220Dan; List Of Setting Items; Setting The Operating Frequency; Setting The Channel (Receiver) Name - Audio Technica ATW-R5220 User Manual

Setting ATW-R5220/ATW-R5220DAN

List of setting items

FREQUENCY MANUAL
Gr/Ch
NAME
AUDIO
SCAN
TX SYNC
SQUELCH AUTO
MANUAL
UTILITIES LOCK
ANT PWR
Gr/Ch
BACKUP
FREQ
AF METER
BRIGHTNESS
ACCESS
RESET
VERSION
NETWORK DEVICE ID
IP SETTING
REMOTE
CTRL
SYSLOG
DISCOVERY
NTP
MAC
ADDRESS
TOOLS WALK TEST
MONITOR
MODE
DANTE* INFO
IP SETTING
MAC
ADDRESS
VERSION
* ATW-R5220DAN only
Set the operating frequency.
Set the channel name.
Set the audio output level.
Scan for open channels.
Set transmitters via IR SYNC.
Set the squelch level.
Set this function to prevent the
receiver settings from being changed.
Set whether to turn power on or off
to the antenna input terminals.
Edit the groups/channels 01 to 10.
Set the backup frequency.
Switch the level meter on the main
screen between receiver and
transmitter.
Set the display brightness.
Set the user access level.
This returns the receiver settings to
their factory defaults.
This function displays product
information such as the version of the
receiver.
Set the receiver's ID No.
Set the IP.
Set the remote control.
Set whether to send the log message
to the Syslog server.
Set automatic detection by the
application.
Set the NTP (Network Time Protocol).
Display the MAC address.
Record for 90 sec. the RF level being
received.
This mode will enable monitoring
with headphones only. (The audio
OUT and DANTE OUT will be muted.)
Display the device name and channel
label.
Set the DANTE's IP.
Display the MAC address.
This function displays product
information such as the version of the
receiver.

Setting the operating frequency

Manual setting
1. From the menu screen, turn the control dial, select
[FREQUENCY] and then press the control dial.
2. Select [MANUAL] and press the control dial.
3. Turn the control dial to set the first 3 digits. When finished
setting them, press the control dial.
4. Turn the control dial to set the last 3 digits. When finished
setting them, press the control dial.
• The setting is complete.
Setting by group/channel
1. From the menu screen, turn the control dial, select
[FREQUENCY] and then press the control dial.
2. Select [Gr/Ch] and press the control dial.
3. Turn the control dial to set the group. When finished setting it,
press the control dial.
4. Turn the control dial to set the channel. When finished setting it,
press the control dial.
• The setting is complete.

Setting the channel (receiver) name

The following characters can be entered:
• The maximum number of characters that can be entered is 8.
Alphabetic (uppercase
letters)
Symbols (+, −, #, &, period)
1. From the menu screen, turn the control dial, select [NAME] and
then press the control dial.
2. Turn the control dial, select the desired character and then press
the control dial.
• The character is input and the cursor moves.
3. Repeat the operation in Step 2 to enter all characters.
4. Turn the control dial, select [End] and then press the control
dial.
• The setting is complete.
16
Numeric
Space