Navigating The View Menu; Channel Display; Name Display; Navigating The Help Menu - Audio Technica ARTIST ELITE 5000 Series Installation And Operation Manual

Navigating the View Menu

The View menu gives you:
• the opportunity to choose either large-, medium-, or small-
sized receiver channel displays in the Main System window.
• the ability to change the display in the Main window to
show all receiver names or all transmitter names.

Channel Display

To change the size of the channel display:
1. Click View.
2. Select Large Size Receivers View to see up to ten
full-height receiver channel strips.
3. Select Medium Size Receivers View to see up to twenty
half-height receiver channel strips.
4. Select Small Size Receivers View to show up to 40 mini
receiver channel strips.
Note: The number of visible receiver channel strips is also
affected by the computer's display resolution and window size.

Name Display

To change name display in the Main System window:
1. Go to View > Show Receiver Names to show receiver
names at bottom of each channel strip.
2. Go to View > Show Transmitter Names to show transmitter
names at the bottom of each channel strip.
Note: Transmitter names must be set (entered) on the
transmitter itself. See the system manual for details.

Navigating the Help Menu

Contents

The Contents of the Help Index are listed and accessible from
this menu.
To access the Help Index:
1. Click Help > Contents.
2. From the list, select the topic you want to learn more about.

About

The About screen gives details of copyright and software
version.
To access the About screen:
1. Click Help > About.
2. Click OK to exit.
Installing and Using the Software
(Continued)
Installing and Using the AE Reflector Service

General:

The AE Reflector service is a Windows software application
that allows multiple computer users on the network to view,
change and configure AE Wireless receiver parameters. You
may install the application on one of the networked computers
running the AEW Control Interface Software.
Note: Because AE Reflector runs as a Windows service, it
must be installed on a computer running Windows NT, 2000
or XP operating system connected to your network.
Note: To use AE Reflector, all of your receivers must have
version 4.2 or later firmware. To verify firmware version, click
File>Network Configurations. The Network Configuration
window opens, showing firmware version for all receivers on
the network.

Installing AE Reflector:

1. Using Windows Explorer or other file management tool,
navigate to the AE Reflector folder on your hard drive. For a
default installation, this folder is located inside Program
Files\Audio-Technica\Artist Elite Wireless Control Interface
ver. 2.0.
2. Open the AE Reflector folder and double click on the Install
AE Reflector icon. A DOS-type window will open indicating
status of the install. When the install is complete, the
window will prompt, "Press any key to continue."
Press any key to close the window and complete the
installation.
Note: To start the service, you will need to restart the
computer.
After installation, the AE Reflector service operates in the
background automatically, every time the computer is started.
To uninstall the AE Reflector service, locate the AE Reflector
folder on the CD, open it and double click the Uninstall
AE Reflector icon.
Caution: When the AE Reflector service is
running, any computer connected to the network
running the AEW Control Interface Software has
access to and can change parameters of any
receiver connected to the network. This
includes: rechannelizing the system, muting
receivers, and disabling or enabling receivers.
15