Page 1
ATN 10x42RF OMEGA CLASS BINOCULAR USEr’S GUIDE (ATN 10X42rF) rEvISIoN 2 - SEPTEMBEr 2009 u s e r ’ s m a n u a l Impor tant E xpor t Restrictions ! Commodities, products, technologies and services contained in this manual are subject to one or more of the export control laws and regulations of the U.S.
Page 2
The information in this manual furnished for information use only, is subject to change without notice, is not to be construed as a commitment by ATN Corp. ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.
Max. Width ..........5.2”/ 132 mm Length ............6.1”/ 155 mm Weight ............26.9 oz/ 0.76 kg * ATN reserves the right to change the above specifications at any time without notice AppLICATION ATN is proud to introduce its professional brand of daytime binoculars: the omega line.
Meets standards and requirements of MIL-STD810 for a lifetime of high performance. pREpARING THE BINOCULAR Your ATN OMEGA Series binocular comes with a neck strap. We rec- ommend that you install the neck strap and use it whenever you are using the binocular.
Your oMEGA Series binocular is designed to be used with a tripod adapter for mounting the unit on a tripod or window mount. To use this feature requires the use of a ATN tripod adapter. To install the tripod adapter, unscrew the knurled cap that is centered on the hinge pin.
Page 6
ranging ability and single mil, half mil spacing on the outer reticle quad- rants for smaller targets or greater distances. An open Un-obstructed field of view is critical for observation. 1 mil .5 mil 10 mils 5 mils RETICLE USE ExAMpLES .5 mil 1 mil .5 mil...
.5 mil .5 mil 1 mil 1 mil 36 inch Target measured with 36 inch Target measured with Mil-reticle as: 3.5 mils tall. Mil-reticle as: 2.25 mils tall. Distance to target: 286 Yards Distance to target: 450 Yards MAINTENANCE Your binocular is designed for years of trouble free use. Following a few service recommendations will ensure years of service.
Follow the instructions on the lens cleaning tissue and cleaner. Lens cleaning supplies are avail- able from ATN or all camera or optical stores. NOTE: Do not “over clean” lenses. Excessive cleaning can damage lens coatings.
ATN, at its option, will either repair or replace the product, and such action on the part of ATN shall be the full extent of ATN’s liability, and the Customer’s sole and exclusive remedy.
Agreement extend solely to the Customer. ATN’s liability hereunder for damages, regardless of the form or ac- tion, shall not exceed the fees or other charges paid to ATN by the customer or customer’s dealer. ATN shall not, in any event,...
Page 11
ATN will not be responsible for improper postage or, missing or dam- aged merchandise during shipment. When sending product back, please clearly mark the rMA# on the outside of the shipping box.