ATN PS-23-2 Specifications

Atn ps-23-2: specifications

Hide thumbs

page of 1

/ 1
Bookmarks

Quick Links

Download this manual

AMERICAN TECHNOLOGIES

NETWORK, CORP.

ATN PS-23-2

The PS-23-2 Night Vision goggles is one of the most

versatile night vision devices available. This unit can be

handheld, head-mounted for hands free usage, it is

camera/ camcorder adaptable, and can be 3x

binocular. The intergrated IR illuminator enhances the

ability of the user to read maps and operate in

confined, zero light areas. The PS-23-2 is available

with several image intensifier options to meet a wide

array of specification requirements. The PS-23-2 night

vision goggles is a complex opticoelectronic system for

individual use. The device consists of the objective lens

assembly, eyepiece and the body.

• High Quality 2+ image intensifier tube

• Super fast lens system provides the user with a clear

and sharp image

• Built-in Infra Red illuminator lets you see even in total

darkness

• 3x lenses (optional)

• Adjustable Flip-up headmount for hands free use

• IR-on and Low Battery indicators

• Single switch knob operation

• Automatic brightness control for high-light protection,

unit will turn off automatically if exposed to excessive

light for more than 10 seconds. If the unit is move

away from the bright light, it will reactivate

automatically.

• Camera/camcorder-adaptable

• Uses one 3V lithium battery

Export Warning: These products are subject to one or more of the export control laws and regulations of the U.S. Government. Pending the model these products are under the control

jurisdiction of either the US Department of State or the US Bureau of Industry and Security US Department of Commerce. Export without proper licensing or consent is strictly prohibited.

American Technologies Network Corp.

1341 San Mateo Avenue, South San Francisco, CA 94080

800-910-2862, 650-989-5100, FAX 650-875-0129

HIGH QUALITY 2+ GEN IMAGE INTENSIFIER TUBE

DESCRIPTION.................................

GENERATION..................................

PHOTOCATHODE TYPE...................

RESOLUTION, LP/MM * ..................

SIGNAL-TO-NOISE RATIO*..............

EXPORT...........................................

FIGURE OF MERIT ........................

* Specifications are provided for informational purposes only. Actual values may vary