ATN PS-7 Operator's Manual page 22

B. Goggles installation and adjustment
now you are ready to mount the nv goggles onto head mount.
BUtton a
SCreW
SoCKET
BRACKET
1. loosen the screw. Push the button a and insert the rail of the PS-
15 into the socket of the headset.
2. Place the headmount with PS-15 on your a head.
3. loosen the screw and move the unit along the rail for eye relief
adjustment.
4. Push the button C and move the PS-15 along the slide rail for
comfortable position.
C. Flip-up Mechanism
1. the PS-7 headmount has a flip-up mechanism. Push the side but-
ton B on the mount and lift the unit up until the unit stops in the top
position. When the device reaches the top/upper position it will
turn off automatically.
2.Push the same button B to lower PS-7 into the viewing position.
the unit will automatically turn back on again for continuation of
the operation.
NOTE
Some of PS-7 contain Flip-up Shutoff System. This system turns
the unit off when the PS-7 is upright on the flip-up head mount.
The unit will automatically turn back on again for continuation of
the operation.
2-4
BUtton B
FIGURE 2-4. HEAD MOUNT OF PS-7
toP StraPS
BACK STRAPS
BUtton C
CHIN STRAP