Function Key Set - ATCOM AT-640P User Manual

AT-640P User Manual
The settings as below:
1, go to System Manage Multi Line set page,
2, set the F1/F2/F3/F4 to Multiple line and set the
SIP1:6111(when the line is sip account) or IAX2:6008(when the line is IAX2
account)
The flow as below:
1,A call AT640P(6111) and AT640P answer the phone.
2,B call AT640P(6111) then Line 2 key will flicker
3,press Line2 or softkey "answer" to answer the call from B, then A will be hold,
Line1 key will flicker.
4.press Line1 to switch to A, B will be hold and Line2 key will flicker.
The one of 4 lines can also be configured as IAX2 line
1.Choose line (for example line1) ,set F1 to Line
2.Set SIP1:name as IAX2:name
8.4. 8.4.
8.4. 8.4.
Function Function Key Key
Function Function Key Key Set
There are 9 function key on the phone, and be expanded to 29 with expander
board.There are 5 types of the key:
1.NONE: do not use this key
2.Memory Key: set Number@Line/Subtype for the key,the number will be send out
ATCOM TECHNOLOGY CO., LIMITED
Set Set
Set
same SIP:name, such as