ATCOM AX-1600P Product Manual page 9

C C C C hapter hapter hapter hapter 4 4 4 4 Software
1. Please add one
"/etc/asterisk/chan_dahdi.conf".
2. Please use the following command to load drivers:
modprobe dahdi
modprobe ax1600p
3. Please use the "dahdi_genconf" command to configure the /etc/dahdi/system.conf file and
generate /etc/asterisk/dahdi-channels.conf file.
debian:~# dahdi_genconf
It does not show any output if dahdi_genconf run successfully.
system.conf
----------------------------------------------------------------------------------------------------------------
# Span 1: WCTDM/16 "Wildcard TDM400P REV E/F Board 17" (MASTER)
fxsks=1
echocanceller=mg2,1
fxsks=2
echocanceller=mg2,2
... ... ... ... ... ... ... ...
... ... ... ... ... ... ... ...
fxsks=15
echocanceller=mg2,15
fxsks=16
echocanceller=mg2,16
# Global data
loadzone
defaultzone
----------------------------------------------------------------------------------------------------------------
www.atcom.cn
Software Software
Software Configuration
command line: "#include
= us (According to your country)
= us (According to your country)
Configuration Configuration
Configuration
dahdi-channels.conf" into the file:
8