Page 1
AX400P User Manual AX400P User Manual ATCOM Analog Card AX400P ® User Manual Version: 2.0 2013-06-03...
Page 2
AX400P User Manual Release note Version Changed note Editor Date First Release Robert Release the User manual Deniel 2013-06-03 www.atcom.cn Email: support@atcomemail.com...
Contact ATCOM The Introduction of ATCOM ATCOM is the leading VoIP hardware manufacturer in global market. We have been keeping innovating with customer’s needs oriented , working with partners to establish a total solution for SMB VoIP with IP phone , IP PBX and Asterisk cards.
Chapter 1 the Introduction of AX400P Overview of the AX400P AX400P Asterisk card is the telephony PCI card that supports up to four FXO or FXS ports. Using the analog card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution which include all the sophisticated features of traditional PBX, and extend features such as voicemail in IP PBX.
AX400P User Manual Chapter 2 Hardware Introduction Hardware Configuration Motherboard: AX400P Dual ports FXS module: AX-110S Dual ports FXO module: AX-110X One FXS port and one FXO port module: AX-110XS Notice: One AX-110S module supports single FXS ports; one AX-110X module supports single FXO ports.
AX400P User Manual Chapter 4 Software Installation After inserting the card into the PCI slot and boot the server, please use the “lspci” command to check the PCI bus compatibility. From the correct output, users can see the following line: ---------------------------------------------------------------------------------------------------------------------- 01:01.0 Communication controller: Tiger Jet Network Inc.
AX400P User Manual Chapter 5 Software Configuration 1. Create the configuration information Please run the “dahdi_genconf” command to configure the “/etc/dahdi/system.conf” file and generate “/etc/asterisk/dahdi-channels.conf” file. [root@localhost ~]# dahdi_genconf It will not show anything if the command runs successfully. After doing that, the “/etc/dahdi/system.conf”...
Page 10
AX400P User Manual After running dahdi_genconf successfully, the dahdi-channels.conf file will get the following configuration: ; Span 1: WCTDM/4 "WCTDM board" (MASTER) ;;; line="1 WCTDM/6/0 FXSKS (In use) (SWEC: MG2)" signalling=fxo_ks callerid=asreceived group=5 context=from-pstn channel => 1 callerid= group= context=default ;;;...