The Installation of AX-1600P/AXE1600P with Centos 6.0 Content C C C C ONTACT ONTACT ONTACT ATCOM ATCOM ............................2 2 2 2 ONTACT ATCOM ATCOM.................................................................................. C C C C HAPTER HAPTER HAPTER HAPTER 1 1 1 1 THE THE INTRODUCTION...
ATCOM The Introduction of ATCOM Founded in 1998, ATCOM technology has been always endeavoring in the R&D and manufacturing of the internet communication terminals. The product line of ATCOM includes IP Phone, USB Phone, IP PBX, VoIP gateway and Asterisk Card.
Overview Overview of of of of the AX-1600P/ AXE1600P Overview Overview the AX-1600P/ AX-1600P/ AX-1600P/AXE1600P AXE1600P AXE1600P AX1600P/AXE1600P Asterisk card is the telephony PCI/PCI-E card that supports up to sixteen FXO and FXS ports. Using AX1600P analog card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution which include all the sophisticated features of traditional PBX, and extend features such as voicemail in IP PBX.
If you want to use FXS port with AX1600P, you have to provide 12V power for the card. If you want to use any module with AXE1600P, you have to provide 12V power for the card. Please download the dahdi-linux for the card in atcom website. W W W W arning...
Test Environment: asterisk-1.6.2.6 dahdi-linux-complete-2.4.1.2+2.4.1 Centos 6.0 AX-1600P+8AX-210X After inserting the card into your PCI slot and boot your server, please use the “lspci -vv” command to check the PCI bus compatibility. The correct output will like the following: ---------------------------------------------------------------------------------------------------------------------- 05:04.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface...
Page 8
Install asterisk 1) [root@localhost src]# tar -xvzf asterisk-xxx.tar.gz 2) [root@localhost src]# cd asterisk-xxx 3) [root@localhost asterisk-xxx]# ./configure 4) [root@localhost asterisk-xxx]# make 5) [root@localhost asterisk-xxx]# make install 6) [root@localhost asterisk-xxx]# make samples www.atcom.cn...
1. Please check if the AX-1600P driver has been loaded successfully, run cat /proc/interrupts command and you should see one line with "ax1600p". If you can not see "ax1600p", you can try to poweroff your server and replug AX-1600P into another PCI slot.
Blocked State pseudo default default In Service from-pstn default In Service from-pstn default In Service ..........from-pstn default In Service from-pstn default In Service www.atcom.cn...
Need help?
Do you have a question about the AX-1600P and is the answer not in the manual?
Questions and answers