Table of Contents
Advertisement
Wireless Digital Media Adapter User Guide
Chapter 5
Playback Video/Music/Photo
After all hardware connections are done and the DMA-100W Media Server software h
installed and configured properly, you can power on DMA-100W. Wait for 30 seconds, the Login
page will show up on your TV screen. If there's no any screen showed up, please double check
the hardware connections, or press the "TV Mode" button on the remote control to switch the
Video output mode. The default video output mode is NTSC. Press the TV Mode until the
screen shows up.
Login Page
The first page being showed up is the login page. You can add, delete or edit profile here. Each
profile represents one active media server in LAN.
1. Choose a Profile to Login
This page will list the profile's name sequence of connecting. The grey profile mark means it's
not in connection right now. The green profile mark means the DMA-100W server is connected.
Only the connected profile can be login.
2. Add/Edit/Delete profile
The DMA-100W can automatically search and connect to DMA-100W server on the same
network. You can press the "Login" button on remote controller to refresh the list of profiles. If
you want to manually add/edit/delete profile, click "Add", "Edit" or "Delete" button to configure.
Note: DMA-100W only connects to one Media Server at a time.
Once you login to the Media Server successfully, the main menu will show up as below.
5
as been
Connected
Not connected
28
Advertisement
Table of Contents
