Update Firmware - Planet DMA-100W User Manual

available wireless networks and display their SSIDs in the drop-down list.
Select the preferred SSID and click "Select" button.
SSID Enter the SSID of the preferred WLAN.
Connection Select Infrastructure or Ad-Hoc connection.
Security Choose the security method used for this wireless network. The DMA-100W
supports WEP 64/128-bit with Open System. This setting must be identical to
the target wireless station.
Key If you choose 64-bit WEP security in the previous option, enter 10 hexadeci-
mal characters (0-9, A-F). If you choose 128-bit WEP security, 26 hexadecimal
characters (0-9, A-F) are required.

Update Firmware

The DMA-100W will connect to a pre-configured network server to check available Firmware
Updates.
Select "Check for firmware update" and press Enter button on your remote control.
If a firmware update is located, you will be prompted to update.
Note: Do not turn off the unit or disconnect the power during the firmware update. Once the
update has been completed, the DMA-100W will restart automatically.
27