Setting The Rear Output And Subwoofer Controller; Switching The Sound Muting/Attenuation - Pioneer AVH-P3150DVD Operation Manual

Section
Initial Settings
15
% Touch AM Step on the initial menu to
select the AM tuning step.
Touching AM Step will switch the AM tuning
step between 9 kHz and 10 kHz. The selected
AM tuning step will appear in the display.
Setting the rear output and
subwoofer controller
This unit's rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (Full) or subwoofer
(Subwoofer) connection. If you switch the
rear output setting to Subwoofer, you can
connect a rear speaker lead directly to a sub-
woofer without using an auxiliary amp.
Initially, the unit is set for rear full-range speak-
er connection (Full). When rear output is con-
nected to full range speakers (when Full is
selected), you can connect other full range
speakers (Rear) or a subwoofer (Subwoofer)
to the RCA rear output.
! When the multi-channel processor (DEQ-
P7650/DEQ-P6600) is connected to this
unit, you cannot operate this function.
1 Touch Rear Speaker on the initial menu.
2 Touch c or d next to Rear Speaker to
switch the rear output setting.
Touch c to select full-range speaker and Full
appears in the display. Touch d to select sub-
woofer and Subwoofer appears in the dis-
play.
# When no subwoofer is connected to the rear
output, select Full (full-range speaker).
# When a subwoofer is connected to the rear
output, select Subwoofer (subwoofer).
# When the rear output setting is Subwoofer,
you cannot operate the following procedure.
3 Touch c or d next to Preout to switch
the subwoofer output or rear output.
Touching c or d will switch between
Subwoofer and Rear and that status will be
displayed.
54
En
Black plate (54,1)
Notes
! Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to Using subwoofer output on page
47).
! If you change this setting, subwoofer output
in the audio menu will return to the factory
settings.
! Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this
setting.
Switching the sound
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
! Sound from this system returns to normal
when the muting or attenuation is can-
celed.
% Touch TEL on the initial menu to select
the setting.
Touch TEL until the desired setting appears in
the display.
! Mute – Muting
! ATT -20dB – Attenuation (ATT -20dB has a
stronger effect than ATT -10dB)
! ATT -10dB – Attenuation
! Off – Turn the sound muting/attenuation
off
Notes
! The sound is turned off, Mute is displayed
and no audio adjustments are possible.
! The sound is attenuated, ATT is displayed and
no audio adjustments, except volume control,
are possible.
! Operation returns to normal when the phone
connection is ended.
CRB2868-A/N
< >54