Pioneer AVH-P3150DVD Operation Manual page 78

Section
Available accessories
19
# When playing discs recorded with more than
96 kHz sampling frequency, audio is outputted
from front speakers only.
# When selecting FM as the source, you cannot
switch to Source Level Adjuster.
# When playing other than the DVD disc, you
cannot switch to Dynamic Range Control.
# When neither Front-L nor Front-R is selected
in Position, you cannot switch to
Time Alignment.
# When both the center speaker and the rear
speaker are set to OFF in the speaker setting, you
cannot switch to Dolby Pro Logic II.
2 Touch ESC to return to the ordinary dis-
play.
# To return to the previous display, touch Back.
Using the position selector
One way to assure a more natural sound is to
accurately position the stereo image, putting
you right in the center of the sound field. The
position selector function lets you automati-
cally adjust the speaker output levels and in-
serts a delay time to match the number and
position of occupied seats. When used in con-
junction with the SFC, the feature will make
the sound image more natural and offer a pa-
noramic sound that envelops you.
1 Touch Position on the DSP function
menu.
2 Touch c/d/a/b to select a listening po-
sition.
Touch one of these, c/d/a/b, to select a lis-
tening position as listed in the table.
Key Display
Front-L
c
Front-R
d
Front
a
All
b
# To cancel the selected listening position,
touch the same key again.
78
En
Position
Front seat left
Front seat right
Front seats
All seats
Black plate (78,1)
Note
When you make adjustments to the listening po-
sition, the speaker outputs are automatically set
for appropriate levels. You can tailor the levels
more precisely referring to Adjusting the speaker
output levels using a test tone or Adjusting the
speaker output levels.
Using balance adjustment
You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1 Touch Fader/Balance on the DSP func-
tion menu.
2 Touch a or b to adjust front/rear
speaker balance.
Each time you touch a or b it moves the
front/rear speaker balance towards the front or
the rear.
Front:25 to Rear:25 is displayed as the front/
rear speaker balance moves from front to rear.
# FR: 0/LR: 0 is the proper setting when only
two speakers are used.
3 Touch c or d to adjust left/right speak-
er balance.
Each time you touch c or d it moves the left/
right speaker balance towards the left or the
right.
Left:25 to Right:25 is displayed as the left/
right speaker balance moves from left to right.
Using the sound field control
The SFC function creates the sensation of a
live performance.
CRB2868-A/N
< >78