Audio Adjustments; Displaying The "Audio" Setting Screen; Using Fader/Balance Adjustment; Switching Sound Muting/Attenuation - Pioneer AVH-X8850BT Owner's Manual

Audio adjustments

Displaying the "Audio" setting
screen
1 Press the button.
2 Touch , and then .

Using fader/balance adjustment

1 Display the "Audio" setting screen.
 Refer to Displaying the "Audio" setting screen on page 42
2 Touch [Fader/Balance].
p Only the balance can be adjusted when "On" is selected in
"Rear Speaker". Touch [Balance] and skip to step 4.
 Refer to Setting the rear speaker output on page 42.
3 Touch or to adjust the front/rear speaker
balance.
p Set "Front" and "Rear" to "0" when using a dual speaker
system.
4 Touch or to adjust the left/right speaker
balance.
 You can also set the value by dragging the point
on the displayed table.
Switching sound muting/
attenuation
You can automatically mute or attenuate the AV source volume
and the iPhone or smartphone application volume when the
navigation outputs the guidance voice.
The default setting is "ATT".
1 Display the "Audio" setting screen.
 Refer to Displaying the "Audio" setting screen on page 42
2 Touch [Mute Level].
3 Touch the item.
 ATT:
The volume becomes 20 dB lower than the current volume.

Mute:
The volume becomes 0.
 Off:
The volume does not change.
42

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of
each source to prevent radical changes in volume when switch-
ing between sources.
p Settings are based on the FM tuner volume level, which
remains unchanged.
p This function is not available when the FM tuner is selected
as the AV source.
1 Compare the FM tuner volume level with the
level of the source.
2 Display the "Audio" setting screen.
 Refer to Displaying the "Audio" setting screen on page 42
3 Touch [Source Level Adjuster].
4 Touch or to adjust the source volume.
p If you directly touch the area where the cursor can be moved,
the SLA setting will be changed to the value of the touched
point.
p "+4" to "–4" is displayed as the source volume is increased
or decreased.
p The default setting is "0".

Setting the rear speaker output

A rear speaker output of this product can be turned on or off.
The default setting is "On".
1 Display the "Audio" setting screen.
 Refer to Displaying the "Audio" setting screen on page 42
2 Touch [Rear Speaker] to switch "On" or "Off".
p If "Off" is selected, the rear speaker adjustment is not availa-
ble in "Speaker Level", "Time Alignment" and "Crossover".

Setting the subwoofer output

This product is equipped with a subwoofer output mechanism,
which can be turned on or off.
The default setting is "On".
1 Display the "Audio" setting screen.
 Refer to Displaying the "Audio" setting screen on page 42
2 Touch [Subwoofer] to switch "On" or "Off".
p If "Off" is selected, the rear speaker adjustment is not availa-
ble in "Speaker Level", "Time Alignment" and "Crossover".
Adjusting the cutoff frequency
value
You can adjust the cutoff frequency value of each speaker.
The following speakers can be adjusted:
Front, Rear, Subwoofer
p "Rear" is available only when "Rear Speaker" is set to "On".
 Refer to Setting the rear speaker output on page 42
p "Subwoofer" is available only when "Subwoofer" is set to
"On".
 Refer to Setting the subwoofer output on page 42
1 Display the "Audio" setting screen.
 Refer to Displaying the "Audio" setting screen on page 42
2 Touch [Crossover] or [Subwoofer Settings].
3 Touch [<] or [>] to switch the speaker.
4 Drag the graph line to set the cutoff position.
5 Drag the lowest point of the graph to set the
cutoff slope.
p The following items can also be set.

:
Switches the subwoofer phase between normal and reverse
position.

LPF/HPF:
Switches the LPF/HPF setting to "On" or "Off".
When it is turned off, the high-pass filter or low-pass filter of
each speaker can also be turned on by touching the graph
lines.

Selecting the listening position

You can select a listening position that you want to make as the
centre of sound effects.
The default setting is "Off".
1 Display the "Audio" setting screen.
 Refer to Displaying the "Audio" setting screen on page 42
2 Touch [Listening Position].
3 Touch the desired position to change the lis-
tening position.
The following items are available:
Off, Front-L, Front-R, Front, All.