Table of Contents
Advertisement
1.0 WARRANTY INFORMATION
Patton Electronics warrants all Model 1180RC/1184RC compo-
nents to be free from defects, and will—at our option—repair or replace
the product should it fail within one year from the first date of shipment.
This warranty is limited to defects in workmanship or materials,
and does not cover customer damage, abuse or unauthorized modifi-
cation. If this product fails or does not perform as warranted, your sole
recourse shall be repair or replacement as described above. Under no
condition shall Patton Electronics be liable for any damages incurred
by the use of this product. These damages include, but are not limited
to, the following: lost profits, lost savings and incidental or consequen-
tial damages arising from the use of or inability to use this product.
Patton Electronics specifically disclaims all other warranties,
expressed or implied, and the installation or use of this product shall be
deemed an acceptance of these terms by the user.
1.1 RADIO AND TV INTERFERENCE
The Model 1180RC/1184RC generates and uses radio frequency
energy, and if not installed and used properly—that is, in strict accor-
dance with the manufacturer's instructions—may cause interference to
radio and television reception. The Model 1180RC/1184RC has been
tested and found to comply with the limits for a Class A computing
device in accordance with the specifications in Subpart J of Part 15 of
FCC rules, which are designed to provide reasonable protection from
such interference in a commercial installation. However, there is no
guarantee that interference will not occur in a particular installation. If
the Model 1180RC/1184RC does cause interference to radio or televi-
sion reception, which can be determined by turning the power off, the
user is encouraged to try to correct the interference by one or more of
the following measures: moving the computing equipment away from
the receiver, re-orienting the receiving antenna and/or plugging the
receiving equipment into a different AC outlet (such that the computing
equipment and receiver are on different branches).
In the event that the user detects intermittent or continuous prod-
uct malfunction due to nearby high power transmitting radio frequency
equipment, the user is strongly advised to take the following steps:
1) Use only data cables with an external outer shield bonded to a
metal or metalized connector.
2) Configure the rear card as shown in Section 3.2 in this manual.
1
1.2 CE NOTICE
The CE symbol on your Patton Electronics equipment indicates
that it is in compliance with the Electromagnetic Compatibility (EMC)
directive and the Low Voltage Directive (LVD) of the Union European
(EU). A Certificate of Compliance is available by contacting Technical
Support.
1.3 SERVICE
All warranty and non-warranty repairs must be returned freight pre-
paid and insured to Patton Electronics. All returns must have a Return
Materials Authorization number on the outside of the shipping contain-
er. This number may be obtained from Patton Electronics Technical
Service at (301) 975-1007, http://www.patton.com, or support@pat-
ton.com.
NOTE: Packages received without an RMA number will not be
accepted.
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 1180RC. Technical Service hours: 8AM to 5PM EST, Monday
through Friday.
2
Advertisement
Table of Contents
