SmartNode 4830 Series Analog VoIP Integrated Access Device Quick Start Guide Approval –Models that are equipped with telecom interfaces have been approved for connection to the public telecommunication network as listed under PSTN regulatory compliance. Important –This is a Class A device and is intended for use in a light industrial environment. It is not intended nor approved for use in an industrial or residential environment.
Page 2
WEEE collection system in your country for recycling. This device contains no user serviceable parts. This device can only be repaired by qualified service personnel. WARNING SmartNode 4830 Series Quick Start Guide...
Page 3
2.0 Powering up the SmartNode Connect the SmartNode to the mains (AC) power source with the power cable. Wait until the Power LED stops blinking and remains constantly lit. Now the SmartNode is ready to configure. SmartNode 4830 Series Quick Start Guide...
A Patton Model 16F-561 RJ45 to DB-9 adapter is included with Note each SmartNode 4000 Series device Figure 1. Connecting to a PC SmartNode 4830 Series Quick Start Guide...
: Link up on interface eth0. 172.16.1.10(if-ip)[eth0]# Make this modified configuration your new start-up configuration. On the next start-up the system will initialize itself using the modified configuration. 172.16.1.10 (if-ip)[eth0]#copy running-config startup-config 172.16.1.10 (if-ip)[eth0]# SmartNode 4830 Series Quick Start Guide...
Page 6
If your application is unique and not covered by any of Patton’s configuration templates, you can man- Note ually configure the SmartNode instead of loading a configuration file template. In that case, refer to the SmartNode Series SmartWare Software Configuration Guide for information on configuring the Smart- Node device. SmartNode 4830 Series Quick Start Guide...
This equipment complies with Part 68 of FCC rules and the requirements adopted by ACTA. On the bottom side of this equipment is a label that contains—among other information—a product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. SmartNode 4830 Series Quick Start Guide...
Users should ensure for their own protection that the ground connections of the power utility, telephone lines and internal metallic water pipe system, are connected together. This protection may be particularly important in rural areas. SmartNode 4830 Series Quick Start Guide...
The safety advice in the documentation accompanying this product shall be obeyed. the conformity to the above directive is indicated by the CE sign on the device. B.6 Authorized European Representative D R M Green European Compliance Services Limited. Oakdene House, Oak Road Watchfield, Swindon, Wilts SN6 8TD, UK SmartNode 4830 Series Quick Start Guide...
The term SmartNode is a trademark of Patton Electronics Company. All other trademarks presented in this docu- ment are the property of their respective owners. Warranty For warranty, trademark and compliance information, refer to the SmartNode 4830 User Manual located online at www.patton.com/manuals. SmartNode 4830 Series Quick Start Guide...
Page 12
SmartNode 4830 Series Quick Start Guide...