Advertisement
Patton's Model 536S units are easy to install and should give you
years of trouble-free service. Here are a few simple instructions to help
you get things hooked up right:
1. Unplug (disconnect) the existing connection between the network
cable and the equipment's I/O port.
2. Install the Model 536S between the incoming network cable and the
protected equipment using the 6" (15.24cm) modular patch cable
(supplied). Place the surge protector as close as possible to the
device being protected.
3. Connect the braided ground strap directly to a chassis ground
connection on the protected device. If you are unsure where to
locate a chassis ground connection on your equipment, consult the
equipment's user manual or contact the manufacturer—the ground
connection is critical for proper operation of the Model 536S.
input from
network
3.0 INSTALLATION
Connection to
frame ground
3
Output to protected
equipment
Advertisement
