Related Manuals for Patton electronics 542
Summary of Contents for Patton electronics 542
- Page 1 USER MANUAL MODEL 542/543 Video Surge Protector SALES OFFICE Part # 07M542/543-B Doc. #072601U, (301) 975-1000 Rev. C TECHNICAL SUPPORT Revised 1/22/08 C E R T I F I E D (301) 975-1007 An ISO-9001 http://www.patton.com Certified Company...
-
Page 2: Warranty Information
Notice: Packages received without an RMA number will not be accepted. Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your Patton Model 542/543. Technical Service hours: 8AM to 5PM EST, Monday through Friday. 1.2 CE NOTICE... -
Page 3: General Information
SATV/CATV security systems with coax cabling. To offer extra protection against damaging transient surges, the Model 542 and 543 utilize a “two point” approach: for each CCTV line, one Model 542 protects the building entrance/exit while a second Model 542 protects each remote camera location. - Page 4 (8/20μs wave form). If the Model 542/543 receives a surge, all voltages will be sent directly to ground through a heavy duty 6” braided metal strap to protect your hardware. The Model 542 and 543 are housed in ABS plastic cases and come with one male and one female BNC/F- Series-type connectors, or two female F-Series connectors, at each end for convenient hook-up using industry standard cables.
-
Page 5: Installation
3.0 INSTALLATION The Patton Model 542 and 543 are easy to install. The following instructions will clearly explain each step: Unplug the existing connection between the coaxial cable and the CCTV equipment's BNC port for the 542, or the SATV/CATV equipment’s F-Series port for the 543. - Page 6 APPENDIX A PATTON MODEL 542/543 SPECIFICATIONS Case: Molded ABS (black) plastic Interface: Coaxial, with one male and one female BNC-type connector, for CCTV Security Systems, or one male and one female, or two female F-series connectors for SATV/CATV Security Systems.
- Page 7 APPENDIX B INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC) COMPLIANCE Meets IEC standards 801.2, 801.4 and 801.5 (CE Mark) Effective January 1996 the European Economic Community will require that all electronic devices be tested and comply with all applicable International standards relating to the product type and category of use.
- Page 8 Dear Valued Customer, Thank you for purchasing Patton Electronics products! We do appreciate your business. I trust that you find this user manual helpful. We manufacture one of the widest selections of data communications products in the world including CSU/DSU's, network termination units, powered and self-powered short range modems, fiber optic modems, interface converters, baluns, electronic data switches, data-line surge protectors, multiplexers, transceivers, hubs, print servers and much more.