Table of Contents
Advertisement
Setup Menus
SYSTEM menu
Item
Superimposed
No.
No.
display
01
INPUT SEL
0000
0001
05
ENCODER SEL
0000
0001
0002
06
V LEVEL CTRL
0000
0001
0002
12
SYS H (HD)
0550
1100
1650
13
V PHASE (HD)
0000
0500
1000
16
SDI SYS H (SD)
0000
0429
0858
20
AV PHASE
0000
0100
0200
The underlining indicates the factory setting.
Setting
Superimposed
display
For selecting the unit's input and determining its operation mode.
HD SDI
0: HD SDI is selected for the unit's input.
The unit operates as an encoder, and SDTI is output.
SDTI
1: SDTI is selected for the unit's input.
The unit operates as a decoder, and HD SDI is output.
For selecting whether the SDI output signals are to be adjusted by the unit or by the
external encoder remote controller.
REMOTE
0: The SDI output signals are adjusted by the external encoder remote controller.
1: The SDI output signals are adjusted by the unit.
LOCAL
2: The SDI output signals are adjusted by the unit and external encoder remote
BOTH
controller.
<Note>
This setting takes effect when the unit is used as a decoder.
For selecting what is to be controlled when the video output level is adjusted by the
external encoder remote controller.
HD
0: The HD video output level can be adjusted.
SD
1: The SD video output level can be adjusted.
BOTH
2: Both the HD and SD video output levels can be adjusted.
<Note>
This setting takes effect when the unit is used as a decoder.
–500
For adjusting the system phase of the HD SDI output (in 27 ns steps).
:
:
–: The phase is moved forward.
0
+: The phase is moved backward.
:
:
<Note>
500
This setting takes effect when the unit is used as a decoder.
It remains unchanged even when the menu is initialized.
–500
For adjusting the video phase of the HD SDI output (in 27 ns steps).
:
:
–: The phase is moved forward.
0
+: The phase is moved backward.
:
:
<Note>
500
This setting takes effect when the unit is used as a decoder.
–429
For adjusting the system phase of the SD SDI output (down-converted from HD) (in
:
:
27 ns steps).
0
–: The phase is moved forward.
:
:
+: The phase is moved backward.
429
<Note>
This setting takes effect when the unit is used as a decoder.
It remains unchanged even when the menu is initialized.
–100
For adjusting the phase of the audio output in relation to the video output (in 20.8 µs
:
:
steps).
0
–: The phase is moved forward in relation to the video output.
:
:
+: The phase is moved backward in relation to the video output.
100
<Note>
This setting takes effect when the unit is used as a decoder.
Description of setting
11
Advertisement
Table of Contents
