Panasonic AJ-HDP151P Operating Instructions Manual page 9

Status Displays
List of status display items
When the unit is used as a decoder
Status
Display
display
sequence
item
1 SDTIIN Displays the format of the SDTI input
signals.
1080i: The 1080i format is used for
720P: The 720P format is used for the
SDTI (flash):
The SDTI signal is not input.
2 HD_OUT Displays the status of the HD SDI
output signals.
1080i: The HD SDI output signals are
720p: The HD SDI output signals are
MUTE: No signals are output.
3 SD_OUT Displays the status of the SD SDI
output signals.
480p: The SD SDI output signals are
480i: The SD SDI output signals are
MUTE: No signals are output.
4 DECFLD Displays the field frequency of the
SDTI input signals.
59.94: The field frequency is 59.94 Hz.
5 REFOUT Displays the status of the output
reference signal.
HD_59: The HD REF input is used as
IN_59: The SDTI input is used as the
INT59: Either HD REF or INPUT is
NTSC59:
INT59N:
Status displayed
the SDTI input signals.
SDTI input signals.
1080i format.
720p format.
480p format.
480i format.
the reference signal. Its field
frequency is 59.94 Hz.
reference signal. Its field
frequency is 59.94 Hz.
selected as the menu item 031
(OUT REF) setting but since
neither of them is input, the
signal of the internal signal
generator (59.94 Hz) is used
as the reference signal.
The HD REF input is used as the
reference signal. Its field
frequency is 59.94 Hz.
SD REF is selected as the menu
item 031 (OUT REF) setting but
since this signal is not input, the
signal of the internal signal
generator (59.94 Hz) is used as the
reference signal.
Status
Display
display
sequence
item
6 UFC
7 TC
8 SDI_A1
9 SDI_A2
10 SDI_A3
11 SDI_A4
9
Status displayed
Displays the status of the HD-SD
format converter (AJ-UDC150P).
LN_CON:
The converter functions as a line
converter.
IP_CON:
The converter functions as an ip
converter.
DW_CON:
The converter functions as a down-
converter.
NONE:
The HD-SD format converter is not
installed.
Indicates whether the time code is in
the drop frame or non-drop frame
mode.
DF: Drop frame mode.
NDF: Non-drop frame mode.
Displays the audio signal channel
output as the CH1 of SD SDI
embedded audio signals.
CH1:The CH1 signals are output.
CH5: The CH5 signals are output.
Displays the audio signal channel
output as the CH2 of SD SDI
embedded audio signals.
CH2: The CH2 signals are output.
CH6: The CH6 signals are output.
Displays the audio signal channel
output as the CH3 of SD SDI
embedded audio signals.
CH3: The CH3 signals are output.
CH7: The CH7 signals are output.
Displays the audio signal channel
output as the CH4 of SD SDI
embedded audio signals.
CH4: The CH4 signals are output.
CH8: The CH8 signals are output.