Lcr Route Selection Code; Lcr Authorization Code; Btl Access Code; Lcr Route Exceptional Code - Panasonic KX-TD208E Operating Instructions Manual

Section of O/I
3.10 LCR
Programming
(P3-46)
3.10 LCR
Programming
(P3-46)
3.10 LCR
Programming
(P3-46)
3.10 LCR
Programming
(P3-46)
3.10 LCR
Programming
(P3-46)
3.12Optional
Programming
(P3-53)
4.13 Expanding the
ISDN Line
Connection
(P4-15)
Feature Title
[702] LCR Route
Selection Code
[706] LCR Route
Exceptional
Code
[703] LCR
Authorization
Code
[705] BTL Access
Code
[707] LCR Leading
Digit Entry
[701] LCR Carrier
Code
[703] LCR
Authorization
Code
[702] LCR Route
Selection Code
[706] LCR Route
Exceptional
Code
[902] System
Additional
Information
Explanation for Area 2
Field 12
Please add the following to the conditions.
¥ To delete the current entry, press # after entering
the area code.
Please add the following to the conditions.
¥ To delete the current entry, press # after entering
the ISDN port number.
Please add the following to the conditions.
¥ To delete the current entry, press # after entering
the programming address.
Please add the following to the conditions.
¥ Enter Ô Õ to pause then send the remaining digits
as DTMF.
Please add the following to the conditions.
¥ is used as a wildcard character that stands for
any digit in a phone number.
To make this assignment effective, you must press
the system reset switch after programming.
Please add the following to the conditions.
¥ The pin number assignment changes depending on
how the extension / CO line switch socket is adjust-
ed. (Refer to 4-14 of the Operating Instructions.),
Item
19