6. Remove the bezel of the optical: it is clicked in place. Use a small
flathead screwdriver to push the 2 clips loose. After that, take away the
bezel from the drive.
Keyboard
1. Remove the battery as described above.
2. Remove the 2 screws below the hinge covers of the LCD.
3. Remove the keyboard cover. If needed, you can carefully pry the
keyboard cover loose with a flathead screwdriver in the hinge covers.
4. On the bottom base, remove the 2 screws in the memory compartment.
Fig. 9 The optical drive bezel.
Fig. 10 Hinge cover screw.
Fig. 11 The keyboard cover.
EasyNote MZ Disassembly Manual
9