Topcover And Touchpad - Packard Bell EasyNote MZ Series Disassembly Manual

Top Cover and Touchpad
1. Follow all steps above to remove the battery, keyboard, LCD panel,
hard disk and optical drive.
2. Remove the 6 screws from the top cover.
3. Disconnect the flatcable of the touchpad.
Note: the flatcable only needs to be pulled out, it is not secured.
4. Remove all remaining screws from the bottom base (17x).
5. Take away the top cover.
Fig. 16 The touchpad cover.
Fig. 17 The bottom of the notebook.
EasyNote MZ Disassembly Manual
12