Dc Jack; Speakers; Lcd Panel - Packard Bell EasyNote MZ Series Disassembly Manual

5. Lift out the CPU fan.
6. To remove the CPU from the socket, turn the screw in the socket 180
degrees to release the CPU.
7. Lift out the CPU.

DC Jack

1. Follow all steps to remove the mainboard.
2. Remove the two screws grounding the DC jack cable (one on DC
board, one near battery connector).
3. Lift the DC jack straight up out of the bracket.
Speaker Assembly
1. Follow all steps to remove the top cover.
2. Disconnect the speaker cable from the mainboard.
3. Remove the 4 screws securing the 2 speakers.
4. Release the speaker cables from the clips.
5. Lift out the speakers
Note
The two speakers are one part; they cannot be replaced individually.

LCD Panel

1. Follow all steps to remove the LCD Panel Assembly.
2. Remove the 6 rubber stoppers in the LCD bezel.
3. Remove the 6 screws.
Fig. 21 The DC jack.
Fig. 22 The speaker assembly.
EasyNote MZ Disassembly Manual
15