View Installation Tutorial - Western Digital WD SATA Hard Drives Installation Manual

View Installation Tutorial

This section allows you to create and print custom hardware installation instructions.
Note: The model number for your hard drive is printed on the label located on the top of the
drive.
1. Insert the Data Lifeguard Tools CD into your CD-ROM drive.
a) If using the DOS version, restart the computer and boot from the CD.
b) If using the Windows version, the CD autoruns on your desktop.
2. Select View Installation Tutorial from the setup menu.
3. Data Lifeguard Tools may ask you to select your model number or the desired hard drive
configuration, depending on whether you run the Windows or DOS version. Follow the
instructions as prompted to create and print your custom instructions.
4. If you are using Windows, your default Web browser will open automatically and display
your custom instructions. If using the DOS version, your instructions will display in the
window. Click Next to print the instructions.
Note: If your hard drive is not listed, you can manually type in the model number.
WESTERN DIGITAL SERIAL ATA HARD DRIVE
INSTALLATION GUIDE
DATA LIFEGUARD TOOLS V11.0 - 8